After installing your best skar speakers, it’s time to put them in the best position for the best sound. The best place to start is with your seating arrangement. If you are placing your speakers on a stand or wall mount, make sure that they are at ear level when seated so that all listeners may hear the best sound.
Here are the top 3 Skar Speakers to check at a glance if you are in a hurry
8 Best Skar Speakers Reviewed
The FSX Series of speakers from Skar Audio is an excellent choice for any system. The FSX-8 mid-range speaker has a 3/4″ MDF cone and 1.5″ voice coil that delivers 175 Watts RMS and 350 Watts Max power handling, making it perfect for high-performance and competition vehicles. The FSX series also features polypropylene woofer cones with rubber surround, full aluminized steel baskets, dual spiders with large terminals, cast aluminum frames, removable grilles, and rubber feet to protect the speaker when not in use.
The Skar Audio IX-8 D4 8″ Dual 4-ohm Car Subwoofer is a beast of a subwoofer that delivers plenty of power to your car audio system. The dual voice coils allow you to wire the sub for 2 or 1-ohm impedance, allowing flexibility in wiring options. The high-strength pressed paper cone and foam surround is engineered with maximum durability to withstand the harshest environments. A spider venting system helps keep this 300 Watt max power beast cool so it can deliver powerful bass day after day.
These new bullet tweeters are a great addition to the Skar Audio line of speakers. These tweeters have a titanium dome, one of the best materials for sound quality. The titanium material will provide you with clear high tones without losing any of the basses from other tweeters. The 1” voice coil also helps with getting all those crisp highs out of your music. You can expect nothing but top quality from these tweeters, and they will be sure to impress anyone who hears them at total volume!
Skar Audio’s VD-10 D4 10″ 800W Max Power Dual 4 Ohm Shallow Mount Car Subwoofer is a perfect choice for the budget-minded enthusiast. The VD-10 was designed with performance and value in mind. It features a high efficiency Pressed Paper Cone Stitched to Premium Foam Surround, a High-Performance Ferrite Magnet Motor Structure, and a Square Perimeter Vent that help achieve the kind of bass you want from an entry-level subwoofer.
Skar Audio VD-10 D4 is a 6.5-inch dual 4-ohm subwoofer with a peak power of 400 watts and RMS power of 200 watts. It has a 2″ copper voice coil, sensitivity (spl) of 82.8 dB, the frequency response of 64 Hz, and Fs of 64Hz. It is a small & compact subwoofer that delivers a tremendous low-end frequency response with hard-hitting bass.
SDR Series Loaded Enclosures are the perfect solution for those who want to add a high-quality subwoofer system to their vehicle but lack the time and space to build a custom enclosure. These loaded enclosures have been designed specifically for subwoofers with a cutout diameter of 8 inches. The SDR series is available in single or dual voice coil configurations and can be configured as sealed or vented enclosures.
The CSS8018 is a high-performance, commercial ceiling speaker designed to provide excellent sound quality in any large or small venue. The 8” woofer provides complete frequency response, and the 1” compression driver delivers crisp, clear highs. The speaker’s multi-tap transformer allows operation on 70V/100V distributed line or 25V constant voltage systems. The CSS8018 fits JBL Professional CSS-BB8 back can and CSS-TR4/8×12 tile rail.
Skar Audio’s SPX-T 1-Inch 320 Watt Max Power Elite Neodymium Aluminum Dome Tweeter is a high-performance component tweeter that utilizes neodymium magnets for premium sound clarity and power output. Utilizing Silk Edge technology, the SPX-T tweeter provides excellent off-axis response and enables it to be mounted near other speakers without causing any noticeable interference. The SPX-T tweeter has a peak power rating of 320 watts RMS power rating of 80 watts per pair.
5 Things To Consider Before Buying Best Skar Speakers
1. Sound Quality
One of the essential considerations for t of equipment is sound quality. This refers to overall audio performance as a response to low frequencies found in music genres such as rap, hip-hop, dubstep, reggae or drum, and bass. While it’s possible to get acceptable results on some lesser-known brands under $ 100, if you want something more powerful with better clarity and consistent tonal levels throughout its range, you’ll want to spend at least $ 200.
2. Power Output Capabilities
Another important concern to have when buying Skar audio products is power output capabilities. If you want to replicate the experience of being at a live concert, where all that sound is coming from one or two prominent speakers or amplifiers, then be prepared to spend some serious money. Many people are satisfied with the small battery-operated devices available for less than $ 10 each. Just remember, they’re not going to strike fear into the heart of your neighborhood bully if he finds out about them!
3. Installation Methods Available
Skar has several different models available in their product line, making installation more complicated depending on what equipment is already in the vehicle, boat, RV, or other application. There are many different ways to attach their products, including screwing them down, using velcro, adhering them magnetically, or even suction cups. Make sure you understand the method of attachment required for each specific model.
4. Physical Appearance
Finally, it’s essential to choose your audio equipment based on appearance and sound quality, and power output capabilities if they’re an essential factor in your overall purchasing decision. Whether it is attached to your car dashboard or installed somewhere else, you want something that looks nice and that doesn’t stand out like a sore thumb when you drive around town. Skar has done a great job at providing audio equipment with sleek exterior designs, which also complement the look of virtually any vehicle interior design.
5. Warranty Information
Finally, you should always inquire about the warranty information before buying any product from any manufacturer, especially when considering a purchase from Skar. One of the most critical questions is how long the warranty lasts and whether it covers accidental damage or other situations. In some cases, there are more affordable alternatives with similar capability ratings which require no installation at all, like this one here http://amzn.to/1J0Hl15, but if you want something that provides excellent sound quality in addition to high power output capabilities; you’ll need to invest in better-quality products for your money.
3 Benefits Of Skar Speakers
1. Aluminium cone material
Skar Audio speakers use aluminum for their cones since they have very high thermal conductivity. Unlike paper and other materials, they will not tear or rip easily, making them more durable than most standard car speakers. Aluminum also has a higher breaking point than paper, so you know they can take all kinds of car environment without getting damaged quickly. Another benefit of using an aluminum cone material over paper or polypropylene is that it can be anodized, which gives the cone a smooth, shiny finish.
2. Rubber surround
Most speakers come with foam surrounds that are incredibly susceptible to tearing and ripping, especially when exposed to weather elements like rain or snow. Skar Audio subwoofers use rubber surrounds because it is more flexible than foam making them resistant to tear and wear. This material will last longer, making your bass speaker produce clear sounds for much longer without requiring you to change the speakers very often.
3. Stitched tinsel leads to reduce fatigue failures due to constant expansion & contraction
Car audio subwoofer systems are powered by heavy-duty magnets, which cause vibrations in the cabin area whenever the bass speaker is playing music. This can be very distracting, which is why manufacturers like Skar Audio use stitched tinsel leads because it reduces the likelihood of wires getting loose and causing problems with your sound system. Tinsel lead wires are typically braided strands of copper or other heavy metals, which you will find crisscrossing to form a mesh over the voice coil and other components in the subwoofer systems. Since the wire expands and contracts whenever heated, this can cause constant fatigue failures but stitching them together prevents this from happening, so your bass speaker works perfectly for much longer without requiring any repairs or replacements.
Final word
We’ve listed some of the best Skar speakers on the market for you to choose from. If these aren’t your style, or if you want more information about another company’s lineup, feel free to leave a comment below! Which Best Skar Speakers do you like most?
