How To Turn Down Mic Sensitivity In Windows 10

by John Sanderson
How To Turn Down Mic Sensitivity In Windows 10

Windows 10 offers a lot of features for users, but one of the most important ones is the ability to adjust mic sensitivity. This means that you can control how loud your computer sounds when someone talks into the microphone. If you’re using a phone or webcam to talk to people, you want to make sure that your mic sensitivity is set to the lowest possible level so that your voice doesn’t get drowned out. If you don’t want your microphone sensitivity to change depending on how loud someone is talking, there are a few ways to do this in Windows 10.

How To Turn Down Mic Sensitivity In Windows 10?

1. If you want to adjust mic sensitivity, go to the Start menu and click on Settings.

2. Click on the Devices icon in the sidebar, then click on “Audio” at the top of the page.

3. Click on “Recording” and then click on “Change microphone settings.”

4. Look for your microphone and then double-click it to open its settings page.

5. Click on the blue bar labeled “Levels” to bring up a slider that allows you to control how sensitive your mic is. Slide it down until it hits 0%. This will ensure that no matter how loud someone talks into your computer, their voice will not be picked up by your microphone unless they speak directly into it.

How To Adjust Mic Sensitivity In Windows 10

1. Open the microphone settings in the Control Panel.

2. In the Mic section, select the microphone you want to adjust mic sensitivity for.

3. Change the mic sensitivity if necessary.

4. Save your changes and close the microphone settings.

How To Troubleshoot The Mic In Windows 10?

1. Right-click on the speaker icon in the taskbar and select recording devices.

2. Click on the microphone that you want to adjust mic sensitivity for and then click on properties.

3. Go to the Levels tab and adjust your microphone’s sensitivity level. You can also use the slider to control how sensitive your microphone is. If you still have problems with your mic after making these changes, try updating your driver or reinstalling it.

4. Click Apply and OK to save your changes.

5. Restart your computer and test the microphone again to see if it’s working properly. If you still have problems using the microphone, try plugging a headset into your computer instead of using the built-in microphone to see if it works better than the built-in one.

10 Best Mics For Windows 10

1. Blue Snowball iCE Condenser Microphone

Blue Snowball iCE Condenser Microphone is a USB Plug and Play microphone. It has a cardioid pattern that picks up sound from the front and minimizes sound pickup from the sides and back of the microphone. It is compatible with Windows XP, Windows Vista, Windows 7, and Windows 8 operating systems.

2. Blue Yeti USB Microphone

The Blue Yeti USB Microphone delivers studio-quality sound in a sleek package that’s perfect for home recording or podcasting. Record vocals, guitar, or your favorite instruments with four different pattern settings. This mic also has an XLR input for use with professional condenser mics! The Blue Yeti uses Blue’s proprietary tri-capsule technology to deliver a rich, warm sound quality in any environment. The included stand makes setup a breeze!

3. Audio Technica AT2020USB+ Cardioid Condenser USB Microphone

The Audio Technica AT2020USB+ Cardioid Condenser USB Microphone features a 16-bit, 44.1/48 kHz resolution for professional recording quality. The cardioid polar pattern reduces the pickup of sounds from the sides and rear of the microphone to provide clear reproduction of your intended sound source while still picking up enough ambient noise to give a sense of acoustic space. The included stand makes setup a breeze!

5. Blue Yeti Pro USB Microphone- Blackout Edition

The Blue Yeti Pro USB Microphone- Blackout Edition features four pattern selection modes and a tri-capsule array that delivers a natural sound quality. The four selectable patterns include stereo, cardioid, omnidirectional and bidirectional to capture a variety of recordings with clarity. The included stand makes setup a breeze!

6. Samson Meteor Mic USB Studio Microphone

Samson Meteor Mic USB Studio Microphone is an easy-to-use professional studio mic for recording vocals, instruments, or podcasts on your PC or Mac computer with no special software or drivers required! The Meteor Mic offers high-quality audio reproduction with its 16 bit analog to digital converter (ADC), 44.1/48 kHz sampling rate capability, +10 dB gain switch for loud sounds like kick drums or amplifiers, and +20 dB boost button for soft sounds like vocals or acoustic instruments when recording directly into your computer’s audio interface or mixer/interface for live performances (see specs below). The included stand makes setup a breeze! This mic also comes in Blackout Edition.

7. Samson Go Mic Portable USB Condenser Microphone

The Samson Go Mic Portable USB Condenser Microphone features a cardioid pattern for clear, natural sound quality, and a built-in headphone jack for zero-latency monitoring. This mic also comes in Blackout Edition.

Conclusion

In order to properly sound your voice in Windows 10, you need to adjust your mic sensitivity. If you’re not sure how to do this, check out our guide on how to adjust mic sensitivity in Windows 10.

FAQs:

1. Why does my microphone have a pop sound?
There are a number of reasons for this. Your mic could be picking up too much background noise, or you could be speaking into the microphone too close to your mouth. You can adjust your mic’s sensitivity in Windows 10 to help reduce these pops.

2. What does the red dot mean on my microphone in Windows 10?

This means that you are using the built-in microphone for voice input, and not another mic (such as a USB or headset).

3. Why can’t I adjust my mic sensitivity in Windows 10?

If you’re having trouble adjusting your mic sensitivity, try restarting your computer and then trying again. If that doesn’t work, try unplugging and then replugging in your microphone.

You may also like