How To Reset Powerbeats Pro – The Ultimate Guide

Sometimes your headphone system just isn’t cutting it. You know that feeling when you’re out with the guys and they all have their smartphones out but you don’t have anything to listen to? You know that feeling when you’re home and the sound is too loud and you can barely hear your kids? You know that feeling when you travel but the battery on your phone is dead? That’s powerbeats pro for you. These headphones are made for people like you. These are high-quality headphones with very low power consumption. They have a battery-saving feature as well as a power-saving mode. But, what if you can’t recall how to turn them on or off?

How To Reset Powerbeats Pro?

1. Hold the power button for a couple of seconds.
2. Now, press and hold the volume down button.
3. While holding both buttons, press and hold the power button again for a couple of seconds.
4. Release all three buttons at the same time.
5. The headphones should now be reset and you should be able to use them normally again

What Is A Powerbeats Pro?

A powerbeats pro is a high-quality, noise-isolating headphone with an advanced noise-canceling feature. These monitors feature an in-line remote control for convenient operation. A full metal body, with a soft-touch finish, offers premium comfort and a secure fit.

How To Set Up Powerbeats Pro?

• Plug the powerbeats pro into your device.
• Turn on the powerbeats pro by pressing and holding the power button for a couple of seconds.
• The headphones should turn on automatically, but if they don’t, press and hold the power button again for a couple of seconds until you hear a voice prompt telling you that your headphones are ready to pair.
• When you hear this voice prompt, go to your Bluetooth settings on your device and select “powerbeats pro” from the list of available devices.
• Once paired, you should hear another voice prompt telling you that pairing is successful and that you can start listening to music immediately.

How To Use Powerbeats Pro?

1. Turn on/off: Press and hold down the power button for 3 seconds until it turns off or on (the indicator light will flash red or blue). To turn off, press and hold down the power button for 3 seconds until it blinks red five times (the indicator light will be off). To turn it on, press and hold down the power button for 3 seconds until it blinks blue five times (the indicator light will be blue).
2. Powerbeats Pro will automatically enter sleep mode after 30 minutes without any audio signal inputted into them; in order to wake them up from sleep mode, simply press either one of the volume buttons once; if there is still no audio signal inputted into them, they will automatically go back to sleep mode after 30 minutes.
3. If you want to turn off the powerbeats pro, press and hold down the power button for 3 seconds until it blinks red five times (the indicator light will be off).
4. After you have turned on the powerbeats pro, they will automatically connect to your device. If you want to connect them to another device, simply press and hold down either one of the volume buttons for 5 seconds until you hear a voice prompt telling you that pairing is successful; once that is done, your headphones are now connected to another device.
5. If your powerbeats pro is connected to another device, you can switch back to the device that you originally connected them to by pressing and holding down either one of the volume buttons for 5 seconds until you hear a voice prompt telling you that pairing is successful; once that is done, your headphones are now connected to another device.
6. If your powerbeats pro is connected to another device, but if you want to disconnect them from it and reconnect them back to the original device that they were originally paired with, simply press and hold down either one of the volume buttons for 5 seconds until you hear a voice prompt telling you that pairing is successful; once that is done, your headphones are now connected to another device.
7. If your powerbeats pro is not connected to any other devices, they will automatically connect with any other Bluetooth-enabled devices within range.

How Do Charge Powerbeats Pro?

• Plug the lightning cable into a wall charger or computer USB port. Insert the lightning connector into the charging port on top of the right earcup (the lightning connector should be facing up).
• The indicator light on top of each earcup will turn red while charging and turn off when fully charged. When charging is complete, both earcups’ indicator lights will be red.
• When charging is complete, unplug the lightning cable from both ends by pulling on it gently; do not pull on the cable by the connector.

Charge With A Micro-Usb Cable

1. Plug the micro-USB cable into a wall charger or computer USB port. Insert the micro-USB connector into the charging port on top of the right earcup (the micro-USB connector should be facing up).
2. The indicator light on top of each earcup will turn red while charging and turn off when fully charged. When charging is complete, both earcups’ indicator lights will be red.
3. When charging is complete, unplug the micro-USB cable from both ends by pulling on it gently; do not pull on the cable by the connector.

Charge Powerbeats Pro With A Lightning Cable?

• Plug the lightning cable into a wall charger or computer USB port. Insert the lightning connector into the charging port on top of the right earcup (the lightning connector should be facing up).
• The indicator light on top of each earcup will turn red while charging and turn off when fully charged. When charging is complete, both earcups’ indicator lights will be red.
• When charging is complete, unplug the lightning cable from both ends by pulling on it gently; do not pull on the cable by the connector.

How To Fix Powerbeats Pro Connection Problems?

1. Turn off Bluetooth on your phone and turn it back on.
2. Turn off Bluetooth on your phone and turn it back on.
3. Restart your phone.
4. Restart the powerbeats pro by holding down the power button for 10 seconds until the LED flashes red and blue, then turn them back on.
5. Make sure that you are not too far away from your device, as the range is up to 30 feet (9 meters).
6. Make sure that there are no obstructions between your device and the powerbeats pro, as this can cause connection issues or dropouts in sound quality or volume control of your device or headphones
7. Make sure that the powerbeats pro is fully charged.
8. Try using a different lightning cable or micro-USB cable to charge the powerbeats pro.
9. Make sure that the powerbeats pro is fully charged.
10. Try using a different lightning cable or micro-USB cable to charge the powerbeats pro.
11. Make sure that your device is running the latest version of its operating system (iOS or Android).
12. Restart your device and then try to connect again with the powerbeats pro.
13. If you have a case on your phone, remove it and try connecting again with the powerbeats pro.
14. Try connecting the powerbeats pro with a different device.
15. If you are connected to another Bluetooth device, try disconnecting from it and then connecting with the powerbeats pro.
16. Make sure that the powerbeats pro is fully charged.
17. Try using a different lightning cable or micro-USB cable to charge the powerbeats pro.
18. Restart your device and then try to connect again with the powerbeats pro.
19. If you have a case on your phone, remove it and try connecting again with the powerbeats pro

Conclusion

The powerbeats pro is a sport-luxury headphone with an advanced noise-canceling feature. These monitors feature an in-line remote control for convenient operation. They come with a 3.5mm audio jack for connecting other headphones and a rechargeable battery that can last up to 10 hours. This is a great option if you’re looking for nice-canceling headphones that are also very durable.