How To Get Water Out of Your Phone Charging Port

by John Sanderson
How To Get Water Out of Your Phone Charging Port

Phone charging ports have become commonplace for water to accumulate. We use our phones on a daily basis, and often times we forget to wipe the water off of them. So, do you know how to get water out of your phone’s charging port? If not, then keep reading. This blog will teach you how to remove the water from your phone’s charging port with ease.

How To Get Water Out of Your Phone Charging Port

1. Remove the battery from your phone.

2. Remove the charging port cover plate (if applicable).

3. Locate the water that is on your phone and blow it away with a canned air can or vacuum cleaner, or use a wet/dry vacuum to suck up any water that is in place.

4. Gently wipe down all of the ports with a damp cloth to remove any remaining water and debris.

5. Place a dry cotton ball over the charging port and leave it overnight so that excess moisture can evaporate and dry out (optional).

6. Re-attach the charging port cover plate back on your phone’s charging port, making sure that it is securely attached to prevent it from falling off again (if applicable).

7. Use an old toothbrush to clean off any dirt, debris, dust, or lint under the cover plate (if applicable) and also inside of your phone’s charging port (optional).

8. Replace the battery back into your phone so that you can charge it again (optional).

9. Charge your phone for about 15 minutes (or until there are no signs of power) for best results (optional).

10 . When using your phone, be sure to wipe off any water that may accumulate on top of its screen as this will help prevent damage from occurring to it in the future!

Why Do You Need To Clean Your Phone’s Charging Port?

1. Your phone is draining your battery more quickly by allowing moisture to build up in its charging port and the battery itself.
2. The charging port on your phone can become blocked, which may prevent you from being able to charge your phone and make it unusable.
3. If you have a water-damaged phone, then it is likely that the water/moisture will cause corrosion inside of the charging port, which will make it difficult for you to use your phone again.
4. When using a wet/dry vacuum cleaner or canned air can, you are removing all of the debris from inside of the charging port, helping keep it clean for future use (if applicable).
5. If there are any cracks or holes in your charging port cover plate (if applicable), then this may allow moisture to accumulate inside of it and cause damage to your phone’s battery and charging port over time as well as potentially making them unusable (if applicable).
6. You should always wipe down any debris from inside of your phone’s charging port with a damp cloth before re-attaching its cover plate back onto it so that excess moisture does not accumulate on top of that area again (if applicable).
7. To prevent water damage in the future, be sure to clean off all excess dirt/debris/dust from under the cover plate (if applicable) and around its edges as this can help prevent moisture from accumulating in these areas again (optional).
8. To prevent corrosion from occurring to your phone’s battery and charging port, be sure to wipe down the battery and charging port with a damp cloth (if applicable) every time you charge/use it (optional).
9. You should also clean off any excess water that may accumulate on top of your phone’s screen as this can damage the screen over time (if applicable).
10. Lastly, you should clean off any excess water that may accumulate on top of your phone’s screen as this can damage the LCD display over time (if applicable).

What’s The Simplest Way To Clean Your Phone?

1. Use a soft, clean microfiber cloth, cotton swab, or vacuum cleaner to wipe off your phone’s screen (if applicable).

2. If you have a water-damaged phone, then use compressed air to blow out all of the debris that may be inside of your phone’s charging port (if applicable) and on top of its cover plate/battery.

3. Use canned air to blow out all of the debris that may be inside of your phone’s charging port (if applicable) and on top of its cover plate/battery.

4. Use a wet/dry vacuum cleaner or canned air can blow out all of the debris that may be inside of your phone’s charging port (if applicable) and on top of its cover plate/battery.

5. Use an alcohol-based solution to wipe off your phone’s screen (if applicable).

6. If you have a water-damaged phone, then use alcohol-based solutions to clean up any corrosion from inside of its charging port (optional).

7. To prevent corrosion from occurring in the future, be sure to wipe down your battery with a damp cloth before re-attaching its cover plate back onto it so that excess moisture does not accumulate in this area again (optional).

8. You should also clean off any excess moisture from around the edges where the case meets the screen so that no more moisture can accumulate there in the future as this will damage your phone’s LCD display over time (if applicable).

9. Use a cotton swab or a soft, clean microfiber cloth to wipe off your phone’s screen (if applicable).

10. Use canned air to blow out all of the debris that may be inside of your phone’s charging port (if applicable) and on top of its cover plate/battery.
You can also use a damp towel or cloth to wipe off your phone’s screen if you have a water-damaged phone (optional).

How To Keep Safe Your Phone From Dust?

1. Use canned air to blow out all of the debris that may be inside of your phone’s charging port (if applicable) and on top of its cover plate/battery.

2. To prevent corrosion from occurring in the future, be sure to wipe down your battery with a damp cloth before re-attaching its cover plate back onto it so that excess moisture does not accumulate in this area again (optional).

3. You should also clean off any excess moisture from around the edges where the case meets the screen so that no more moisture can accumulate there in the future as this will damage your phone’s LCD display over time (if applicable).

4. Use a cotton swab or a soft, clean microfiber cloth to wipe off your phone’s screen (if applicable).

5. Use canned air to blow out all of the debris that may be inside of your phone’s charging port (if applicable) and on top of its cover plate/battery.

6. You can also use a damp towel or cloth to wipe off your phone’s screen if you have a water-damaged phone (optional).

7. You should also keep your phone away from dust particles for better protection against dust particles and avoid storing it in dusty environments as well as avoid placing it near heat sources such as heaters or other objects that produce heat because these can cause deformation or melting of some parts within your device which may cause fire or malfunctioning issues with it.

8. To prevent corrosion from occurring in the future, be sure to wipe down your phone’s charging port (if applicable) with a damp cloth before re-attaching its cover plate back onto it so that excess moisture does not accumulate in this area again (optional).

9. You should also keep your phone away from dust particles for better protection against dust particles and avoid storing it in dusty environments as well as avoid placing it near heat sources such as heaters or other objects that produce heat because these can cause deformation or melting of some parts within your device which may cause fire or malfunctioning issues with it.

10. To prevent corrosion from occurring in the future, be sure to wipe down your phone’s screen with a damp cloth before re-attaching its cover plate back onto it so that excess moisture does not accumulate in this area again (optional).

Conclusion

Water entering your phone’s charging port could be the result of a faulty wire or clogged port. The last thing you want is a wet phone. Follow this guide to clean your phone’s charging port and prevent any future issues.