The world is full of wireless signals. Wi-Fi connections, cell phone networks, and other wireless technologies make it possible to transfer data without using cables or wires. Bluetooth is another example of a wireless network that has gained increasing popularity in recent years. If you’re reading this article, chances are you have had a negative experience with your Bluetooth signal at some point. Maybe your audio cut out for no apparent reason, or there was an annoying lag when you used your phone to stream content to your car’s speakers. Fortunately, there are some simple things that you can do to improve the quality of your Bluetooth signal so that it works more smoothly and flawlessly every time. Here are five ways to boost the signal on your device
How To Boost Bluetooth Signal?
1. Buy a new Bluetooth device
This might sound like an obvious choice, but it’s actually the most important one. If you’re having trouble with your Bluetooth signal, it’s likely that the problem is with your device and not in your environment or on your phone. A new Bluetooth device will give you a fresh start, so try buying one and giving it a shot.
2. Use an external antenna rather than the one built into the phone or computer
If you have an older-model phone or computer, it may have an internal antenna that is used to receive data signals from other devices. While this may work perfectly fine for now, it’s often recommended to use a different antenna that is designed specifically for use with wireless technology to get better results.
3. Consider upgrading your router
If you’re using a router that was made several years ago and didn’t support newer wireless standards such as 802.11ac (WiFi), you may find that the signal from devices such as your phone or computer is weak. Newer routers incorporate new technology that can enhance the signal strength of devices, so it’s worth upgrading to a better model if you can afford it.
4. Use the right kind of cable
If you’re using a standard USB cable to connect your phone or computer to another device, it’s possible that the signal quality isn’t as good as it could be. A better alternative is to use a micro-USB cable instead, which is designed specifically for wireless connectivity and has been shown to be more effective than standard USB cables when transferring data from one device to another.
5. Check your environment
If there are some things in your environment that could potentially affect the quality of your wireless signal, you may find that the connection between your devices and those factors is causing problems for you. If you have metal objects near where you’re trying to connect with Bluetooth devices, for example, try moving them away from where you’re sitting or standing so that there aren’t any metal materials in the area. If you have a lot of metal objects in your environment, it could be worth buying some anti-static sleeves to place on your phone or computer to prevent any potential damage from occurring while they’re in use.
6. Don’t use the same wireless network for both Bluetooth and Wi-Fi
If you have a wireless router that allows you to connect to both Wi-Fi networks and Bluetooth signals, it’s possible that using both at the same time could give your device a weaker signal than it needs or an even worse one than it’s used to. Instead of doing this, try connecting your devices only via either Wi-Fi or Bluetooth so that they’re connecting only with the one they need to connect with at any given time.
7. Keep The Distance Short
- Keep the distance between your Bluetooth device and your other devices short. The closer the devices are, the more likely that one of them will be transmitting at a higher power level than the other. This will cause constant signal interference and can result in poor performance on both sides.
- Try to keep your phone out of your pocket when you’re not using it, or at least take it out when you are using it. Don’t leave it lying on a desk or table, and don’t put it in a bag or purse without taking it out first. Keeping your phone away from other devices that can transmit signals can help prevent signal interference and give you an uninterrupted connection to use with your Bluetooth device.
- Keep your phone close to where you want to connect with another device by keeping both within range of each other. If there is too much space between them, Bluetooth signals won’t be able to travel through the air, and the devices will have to communicate via radio waves. This can result in poor connection quality or even no connection at all.
- Keep your phone away from metal objects. Metal objects reflect radio waves, which can cause signal interference and decrease the quality of your Bluetooth connection. If you’re using a metal laptop case as an example, keep it at least one inch away from the edges of your laptop so that signals don’t get reflected back into your device and interfere with your connections.
8. Change The Location Of Your Device
- The easiest way to improve the quality of your Bluetooth signal is to simply move your device. If you have a laptop, smartphone, or tablet that you use frequently, consider putting it on a different surface. For example, if you use your laptop on your desk at home and have a bad Bluetooth signal from there, move it to another surface like a table or countertop. The same goes for any other device that you use regularly.
- If you often use the same location for working or playing on your device and find that the signal is not what it should be, try moving your device around. Look for any other area in the room where there are no obstructions, and try moving your device there instead of just resting it on its original spot.
- Another way to improve the quality of the Bluetooth signal at certain locations is by changing the orientation of your device. For example, if you place a laptop on an uneven surface like a bedside table where you normally use it, try adjusting it so that the screen is facing down to reduce any interference from the wall.
9. Update your device’s software
The first and most obvious solution to improving the signal on your Bluetooth device is to update the software that runs on it. Most modern devices are updated automatically with new operating system updates. If you have an older device that has not been updated in a while, this should be the first step you take to boost your Bluetooth signal. The easiest way to do this is through your phone’s or tablet’s settings menu. You can also try searching for a new version of the operating system by searching online for “[device] download [OS version]” or something similar.
10. Turn off background apps and services.
Another common cause of poor Bluetooth signal is an app or service that uses up too much of the available bandwidth on your device. This can happen when you have multiple applications running at once, such as streaming music from Spotify while using an app like WhatsApp or Facebook Messenger at the same time. The best way to fix this is to turn off background applications and services. To do this, go into your device’s settings menu and look for the option to “Manage applications” or something similar. This will allow you to disable any apps or services that are running in the background. Some applications will automatically update without your knowledge, so be sure to check before disabling an app that is required by your device.
11. Download a better Bluetooth driver
If you have tried turning off background apps and services and still have a poor Bluetooth signal, then it is time for the next step – updating your driver software and the device itself. This can be done through the manufacturer’s website or through using one of a number of third-party websites that provide drivers for common devices like laptops, phones, tablets, and other accessories. The drivers available on these websites are usually more up-to-date than what comes preinstalled on your device from the manufacturer, so you should consider using them as they will usually work better with your device.
12. Use a Bluetooth booster
- Use a Bluetooth booster. These devices can help with Bluetooth connectivity problems, especially if you’re using a device that doesn’t have enough power to provide a strong signal. You can get these units for as little as $10, but it’s best to spend a bit more for something that will last longer.
- Avoid using the phone in areas where Bluetooth signals aren’t strong enough. If you move around with your phone in your pocket or bag, it can interfere with your phone’s ability to connect and communicate with other devices.
- Don’t use a phone if you have poor reception. The best way to improve the signal strength is to avoid using the device when there is an unstable connection or when you know that there is poor coverage where you are located. This will keep your battery life up and save money on monthly service bills!
- Keep the device away from metal objects such as walls or metal devices. This can prevent your phone from connecting to the best possible signal and can also cause interference that prevents you from using your device.
Conclusion
A lot of people experience problems with their Bluetooth signal at some point. Fortunately, there are some simple things that you can do to improve the quality of your Bluetooth signal so that it works more smoothly and flawlessly every time. Before you try anything else, make sure that your device’s software is up to date. You can also turn off Bluetooth features you’re not using and move your devices to different rooms.
