How Much Thermal Paste Do I Need For My Computer?

by John Sanderson
how much thermal paste do i need

You may have heard the saying, “A computer is a tool, not a temple.” But if you want to make the most of your computer, you need to be aware of how much thermal paste you need. Thermal paste is a type of adhesive that typically is used on the backside of computer screens and other electronic devices. It helps keep your device heated up during use so that it can run faster and stay intact. And because it needs to be applied consistently throughout the device, it can be very important to have enough of it.

How Much Thermal Paste Do I Need For My Computer?

You will need around 1.5 ounces (50 grams) of thermal paste per square inch of device. This means that if you have a computer with an average size screen, you would need at least 3 square inches of thermal paste. You may also find that you need more or less paste depending on the device and the temperature at which it is being used. For example, a laptop at room temperature will require about 2 tablespoons of paste, whereas a computer in the freezer will require about 4 tablespoons of paste.

What Are The Benefits Of Using Thermal Paste?

1. It is easy to apply

Thermal paste is applied to the device in a thin layer. For example, if you use a computer screen, you can simply place the screen on the table or on your lap and spread the paste over it with your finger or a brush.

2. It can cause less damage to surfaces

Thermal paste is used as an adhesive and because of this, it will not cause damage to surfaces that it touches, like your table or your lap.

3. Heat will be retained

When the thermal paste is used in computers and other devices, heat is retained by putting it on the bottom of the device and surrounding areas where heat would be generated by heat sources such as processors, fans, and power cords

4. It can keep devices running longer

If you want your computer or another electronic device to last longer without breaking down or losing its performance, then using thermal paste will help keep it running faster than if there was no thermal paste applied at all. In fact, a study conducted by Futuremark revealed that when thermal pastes are used in computers that are placed on tables for long periods of time such as gaming systems or laptops with larger processors and fans (such as those for gaming), these devices lasted up to 5 times longer than when they were not used at all!

5. It can protect against drops:

If you are worried about damaging your device while you travel with it (or even if you just want extra protection), then using the thermal paste is a great way to protect your device from drops.

6. It can prevent overheating:

If you are trying to keep your device cool while it is running, then a layer of thermal paste will ensure that heat is not allowed to build up in the processor or other parts of your device. This will help keep your device running faster and longer without problems.

7. It can reduce vibrations:

If you are worried about damaging the internal parts of your electronic devices when they are used on tables or laps, then using thermal paste can help reduce these issues by making sure that the devices don’t move around as much when they are placed on surfaces and during use. This will also help keep them running longer and with fewer problems than if there was no thermal paste applied at all.

What Is The Purpose Of Thermal paste?

The purpose of thermal paste is to make sure that components such as processors, fans, and power cords do not overheat and get damaged because they were placed directly on a surface without any protection from a layer of thermal paste. When this happens, it results in overheating which causes damage to these items which could lead to failure, or even cause permanent damage that could result in an early death for your electronic device!

How Do I Apply Thermal Paste?

1. Make sure that your device is off: If you are using a CPU cooler, then make sure that your processor is off before applying the thermal paste so that there is no heat build-up under it which could cause overheating and damage!

2. Apply the thermal paste: To apply thermal paste, you will need to spread some out on a surface such as an old piece of paper or piece of cardboard and rub it into place with your fingers or with something like an applicator tool or small spatula. You can also mix some up if you have other items like toothpicks or other things around that can be used for spreading out the thermally conductive material!

3. Wait for 30 seconds: Once applied, wait for 30 seconds before turning on your device so that the heat from the processor can get to the thermal paste and allow it to conduct heat from your processor to your device.

4. Turn on your device: After waiting for 30 seconds, you can turn on your device and use it as normal!

5. Heat is absorbed by thermal paste: The heat that is absorbed by the thermal paste is also conducted away from the surface of your electronic device which allows for better cooling and prevents overheating of internal components.

What Are The Consequences Of Not Using Thermal Paste?

1. Components overheat

If there is no thermal paste applied to a component, then it will continue to get hotter and hotter until the component reaches the point where it is damaged beyond repair.

2. Components fail

This can also lead to components failing in a short amount of time which could result in damage to your electronic device if it is not taken care of properly!

3. Device overheats

If there is no thermal paste on a device and the device gets hot enough, then the heat from the processor could cause damage to other components such as fans or power cords that are placed directly on top of your device which would result in an early death for your electronic device!

4. Damage from overheating

Overheating can also cause damage from overheating which could result in you having to replace parts or even an entire electronic device because of this!

5. Early death for devices

If devices aren’t taken care of properly, then it could lead to devices dying before their time because they weren’t able to cope with being placed directly on a surface without any protection at all!

6. Device damage

This can also lead to unnecessary damage that could be caused by placing components directly on top of each other without any protection at all!


Why is it important to have a thermal paste?

The main reason why one should have thermal paste on their electronic device is that it prevents components from overheating!

How do I know when it’s time to apply my thermal paste?

When applying your thermal paste, you should pay attention to the temperature of your electronic device. If the temperature of your device gets too high, then you should apply more thermal paste to prevent damage from occurring.

What kind of thermal paste should I get?

There are many types of thermal pastes that can be purchased but if you want the best results then you will want to get one that is specifically designed for use by electronic devices! It’s best to get one that is specifically designed for use by electronics devices because they will allow for a better heat transfer process and will also provide better cooling because they are designed with a specific purpose in mind.

You may also like