Are you looking for the best RAM for Ryzen 5 3600? If so, you’re in the right place! In this blog post, we will give you our top recommendations for memory modules that will work best with AMD’s latest processor. We’ll also provide some advice on what to look for when shopping for RAM sticks. So without further ado, let’s get started!
Here Are The Top 3 RAM for Ryzen 5 3600 To Check At A Glance If You Are In A Hurry:
Top 8 Best RAM for Ryzen 5 3600 Reviewed
Buying Guide For The Best RAM for Ryzen 5 3600
1. Number of RAM sticks you need
The first thing to consider when buying RAM is how much do you actually need? If you are building a PC with the Ryzen 5 3600, chances are it is for productivity reasons, whether it’s for gaming or just web browsing. This is where things get interesting with Ryzen CPUs. Computers can use up to 64GB of RAM these days, but most programs are not optimized to use that much memory. Data gets sent out of your computer very frequently if multiple programs are loaded on startup, so this results in more speed and less lag time overall. Aiming for 32GBs of ram would be a good start especially if you don’t know what tasks your computer will have to run at any given time. If you are a power user, however, who keeps lots of tabs open in Chrome or programs running constantly, then go with the full 64GBs to be safe.
2. Memory Modules
Single vs Dual-Channel So let’s say that for whatever reason 32GBs of RAM is not enough and you need more memory for your new Ryzen to build. Or perhaps you encounter a sweet deal on some 16GBs of RAM sticks. What do you buy? The first thing to consider when buying more memory is whether or not it can run in Dual Channel mode or if it has to be Single Channel mode. In order to take full advantage of the speed of modern RAM, they have to be used in pairs (or four sticks for quad-channel mode). If you try to use four identical sticks individually, the computer will only use one stick at a time.
3. How much speed do you need?
Before delving into the speeds and latency of RAM, let’s get back to basics for a second to make sure we are all on the same page. DDR4 is simply the latest generation of Dynamic Random Access Memory (RAM) that has been developed by JEDEC (a semiconductor engineering trade organization), which determines what standards technologies like processors follow. You can read more about it here. With that said, there are two factors when considering memory speed: frequency and bandwidth. Frequency refers to how fast information can be stored or from memory while bandwidth measures how much information can be sent or received at any given time.
4. What is latency?
As you go up in frequency, you will get a boost in bandwidth while latency will remain consistent because it is determined by the internal clock of the RAM itself. Memory modules are usually tuned to run at 2133 MHz and 2400 MHz frequencies with lower latencies than higher frequencies (e.g., 2800 MHz). To avoid confusion between capacity and speed, capacity refers to how much data can be stored while speed refers to how fast that data can be accessed when needed. That said, most consumers would probably prefer faster RAM with lower latency settings since we tend to favor speed overcapacity. All things considered, DDR4-2133 is likely the best option if you want speed and capacity to go hand-in-hand.
When speeds become a factor, timings will be as well if you are aiming for the best performance. The only thing to know here is that timings tell you how long it takes one clock cycle to pass by or wait before it can do something else. A lower number of timings means higher performance although there isn’t much difference between 13 and 14 (at least in regards to DDR4). Latencies like CAS (Column Address Strobe) and tRCD (Row Cycle Time) determine the latency, while burst length and burst frequency refer to memory bandwidth. While we could get into more complex explanations about these terms, we’ll leave them at that for the sake of simplicity. In a nutshell, if you want high performance with RAM, go with low timings and latencies.
3 Benefits Of RAM for Ryzen 5 3600
1. Faster and more consistent performance
The biggest benefit of having faster memory is the boost it gives to both gaming and productivity performance. While some would say that Ryzen 3000 series CPUs really don’t show much improvement over their predecessors in most situations (apart from heavily multi-threaded ones), there are a few scenarios where these benefits can be realized.
2. Better benchmark scores
Well, this advantage is self-explanatory. If your processor can execute an instruction in fewer clock cycles thanks to its improved architecture, then obviously you’d expect that instruction to be performed sooner. As a result, your computer will run cooler and quieter as it spends less time under load, resulting in better benchmark scores at the expense of lower power consumption. This applies not only to gaming benchmarks but also artificial benchmarks like PCMark 10 which simulate standard real-world workloads.
3. Advanced features enabled by faster RAM
Some advanced features on AM4 motherboards are reliant on memory speed being well above the stock JEDEC standard of DDR4-2400MHz. These features include NVMe RAID gaming, SLI, and CrossFire support in addition to memory frequency altering for overclocking. In other words, if your AM4 motherboard has these features enabled or available but you’re using slower RAM which doesn’t support them, then there’s no point in having them to begin with.
We hope that this article has helped you to better understand the best RAM for Ryzen 5 3600 and what to look out for when making your purchase. If you have any questions or would like some more personalized advice, feel free to reach out to us in the comments below!