We know that heating your home is essential, and it’s one of those things you can’t skimp on. But with so many heater options out there, it can be tough to figure out which best plug-in wall heater is best for your needs and budget. That’s why we’ve put together this guide full of our favorite models and the best prices we could find!
3 best products comparison
8 Best Products Available In The Market
5 Things To Consider Before Buying The Best Plug-in Wall Heaters
1. Where are there safety requirements for the device?
When choosing a plug-in wall heater, you should pay attention to whether they comply with European standards EN 60439-1 / VDE 0660. If so, this means their safety will be checked by either TÜV Rheinland Product Safety GmbH OR GS Markit Ltd. – all these companies are certified to implement these standards. These requirements are divided into several groups, by the type of device:
For all heater types, there are primary and additional safety requirements. Basic requirements cover such issues as – safe quality (welding quality verification for electrical components), – equipment servicing (all components should be accessible for inspection and maintenance), and other matters. Additional safety requirements depend on the type of device: For fixed or portable internal, especially combustion heaters, it is required to ensure that hot parts will not be touched during operation. Electric devices must have a built-in thermal switch that cuts off power if overheating occurs. An overheated electric device can lead to a fire. Portable devices should also meet the low voltage requirement (up to 50 volts AC/DC).
2. When the walls are wet, is there a risk for an electric shock?
This depends on the type of device. For portable plug-in devices, it is required to have a protection against electric shock (which can be achieved by using insulation )that enables safe utilization of at least up to 500 volts or by using such materials as ceramics and plastics with low dielectric properties (so-called Class II plastic). For fixed wall heaters, this requirement does not apply.
3. How much electricity can the device use in the long term without overloading it?
groundAll appliances sold within the EU should indicate their power consumption and heating capacity on their labels. The label must also include the name and address of the manufacturer, a list of components used, a pictogram indicating how to (use the device safely, and an explanation about its meaning. Maximum power consumption is listed for each specific device type. The sum of the current ratings of all devices plugged into a specific socket must not exceed 10 amperes (also known as 16 amps) each.
4. Is it necessary to purchase an additional socket or install one?
If you want to achieve safe usage from your plug-in heater, then an additional socket should be installed near the heater set. If you do not have enough sockets available positioning nearby, you can also buy a special double adapter that enables two appliances to be connected at once. Of course, this does not mean that other appliances which correct not designated for being used with heater can be integrated safely. If you have a timer device in your house, the connection of the wall heater should be made before this device is plugged into its socket. This will avoid the case when installation turning the timer off will also disconnect your heater.
5. Does attentions it has any security features that are worth remembering?
All plug-in needs heaters should have overheating protection, which turns them off in an overheating or malfunctioning.
Electric devices introduced to the market after 1st January 2005 must also have an earthed plug (grounded). They must also be equipped with a fuse approved for this type of appliance. Some models may only work when the switch is set to the “0” or “I” position. For safety reasons, it is recommended to switch off the wall heater when you are not at home or go to bed for the night. This also applies if you decide to leave your house (holiday, work, etc.). The heater should be unplugged from the socket.
Advantages Of Plug-in Wall Heaters
- Portable Design: One of the most significant benefits of using plug-in wall heaters is their portability. Because these units are simply plugged into an outlet, you can place them wherever they are needed most without doing any installation work at all. Additionally, combined with their small size, this makes it relatively simple for one person to move a heater from room to room or even into storage when it’s not in use.
- Low Operating Costs: Plug-in wall heaters only draw electricity while they are plugged into an outlet and in use. This makes them particularly effective at saving on your home energy expenses. Plug-in wall heaters generally cost about a dollar per day to operate, which is far less than other types of heating systems.
- Low Installation Cost: While installing a built-in heating system can be expensive, plug-in wall heaters require no installation at all because you simply plug them into existing outlets to use them. They also have other costs associated with other types of heating equipment, such as ventilation costs related to chimneys or ducts that may need to be installed.
To Wrap Up
When you need a new plug-in wall heater, it’s essential to do your research. Plug-in space heaters can be more expensive than other types of heating systems and will require installation by an electrician or HVAC technician – so make sure the one you purchase is worth the investment! In this guide, we’ve covered some of our favorites from different price ranges for any room in your home. We hope you will find a good match.