10 Best Plasma Cutter Welders Combo

by John Sanderson

Does your company deal with metal fabrication? If so, you might be looking for the best plasma cutter welder combo. In this blog post, I am going to highlight 10 of the best options that are currently on the market. Whether you’re an experienced fabricator or just starting out, these will help you get started and improve your current tools!

If You Are In A Hurry, Here Are The Suggested Plasma Cutter Welders Combo For You:

Product
Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown
Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown
Product
Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown
Lotos CT520D 50 AMP Air Plasma Cutter, 200 AMP Tig and Stick/MMA/ARC Welder 3 in 1 Combo Welding Machine, ½ Inch Clean Cut, Brown
Product
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
LOTOS LTP5000D 50Amp Non-Touch Pilot Arc Plasma Cutter, Dual Voltage 110V/220V, 1/2 Inch Clean Cut, Brown
Product
LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown
LOTOS LTPDC2000D Non-Touch Pilot Arc Plasma Cutter Tig Welder and Stick Welder 3 in 1 Combo Welding Machine,½ Inch Clean Cut,Brown

Top 10 Best Plasma Cutter Welders Combo Reviewed

1

Features:

  • A portable plasma cutter can cut up to 1/2 inch thick and 3/4 inch severance thickness
  • The lightweight plasma cutter has a handle for portability and uses non-hazardous compressed air for operation
  • 100% duty cycle machine is perfect for cutting stainless steel, alloy steel, mild steel, copper, and aluminum
  • The plasma cutter also features an easy-to-use foot pedal control with adjustable arc start hand torch control

The Lotos CT520D 50 Amp Air Plasma Cutter is a versatile, portable plasma cutter that can cut up to 1/2 inch thick and 3/4 inch severance thickness. The lightweight plasma cutter has a handle for portability and uses non-hazardous compressed air for operation. This 100% duty cycle machine is perfect for cutting stainless steel, alloy steel, mild steel, copper, and aluminum. The plasma cutter also features an easy-to-use foot pedal control with adjustable arc start hand torch control.

Pros
  • A very versatile machine that can be used for a variety of projects
  • The portability is great for taking it to different worksites
  • Non-hazardous compressed air is a big plus
  • The foot pedal control is very helpful in getting the perfect cut
Cons
  • It may be too large and bulky for some projects

Buy on Amazon

Check Price On Ebay

 

2

Features:

  •  Cuts up to 1/2″ (12.7 mm) mild steel
  • Plasma torch with a long consumable life
  • Pilot arc technology for improved cutting quality and longer consumable life
  • Non-touch arc starting for reduced slag and improved cut quality
  • Compact and lightweight design for easy portability

The LTP5000D is a non-touch arc plasma cutter that cuts without touching the tip to the metal, reducing slag and improving cutting quality. The pilot arc technology allows you to cut without touching the tip to the metal. Better cutting quality and longer consumable life.

Pros
  • Pilot arc technology cuts without touching the tip to the metal, reducing slag and improving cut quality
  • Long consumable life
  • Non-touch arc starting for reduced slag and improved cut quality
  • Compact and lightweight design for easy portability
Cons
  • Limited to 1/2″ (12.7 mm) mild steel

Buy on Amazon

Check Price On Ebay

 

3

Features:

  • Has an adjustable pilot arc torch
  • Can be used for many different purposes
  • Cuts through metal quickly and easily
  • Is easy to control and use

LOTOS Pilot Arc Plasma Cutter is a non-contact cutting device that uses the plasma arc. It is used to cut through metal and can be used for many different purposes such as cutting metal pipes, steel plates, and other materials. The plasma cutter has an adjustable pilot arc torch that allows you to adjust the size of the flame, which makes it easier for you to control the speed at which you are working. This helps you get your project done faster than ever before!

Pros
  • The size of the pilot arc torch can be adjusted to help you work faster
  • The plasma cutter is easy to control and use
  • It can be used for many different purposes
  • The cutter cuts through metal quickly and easily
Cons
  • The plasma cutter can be expensive
  • The cutter can be difficult to use if you

Buy on Amazon

Check Price On Ebay

 

4

Features:

  • Can cut through any electrically conductive material
  • Uses a high voltage and low current to create plasma
  • Ionized gas cuts through materials quickly and efficiently
  • The plasma cutter is portable and easy to use
  • Works on a variety of materials including aluminum, stainless steel, and mild steel

Plasma Cutting is the process of cutting through electrically conductive materials by means of an accelerated ionized gas. A plasma cutter uses a high voltage (10,000-50,000 volts) and a low current to create a spark in the air or an inert gas such as argon or helium. The electricity passes between two electrodes and into the workpiece where it ionizes the gas, creating plasma. This plasma excites additional electrons in the metal, which raises its temperature to the point that it glows white-hot and vaporizes.

Pros
  • Efficient
  • Portable
  • Easy to use
  • Can cut through a variety of materials
Cons
  • Requires a power source
  • Limited to cutting electrically conductive materials

Buy on Amazon

Check Price On Ebay

 

5

Features:

  •  The PRIMEWELD pedal control is a foot pedal control for the PRIMEWELD CT520D and CT520DP.
  • The foot pedal makes it easier to control your cutting and welder machines.
  • The adjustable amperage range from 0-200 amps, allowing you to make precise cuts or welds, depending on your job needs.

The PRIMEWELD pedal control is a foot pedal control for the PRIMEWELD CT520D and CT520DP. The foot pedal makes it easier to control your cutting and welder machines. The adjustable amperage range from 0-200 amps, allowing you to make precise cuts or welds, depending on your job needs. 5 prong connection. 3-year warranty 7 days a week customer service in the USA.

Pros
  • 5 prong connection.
  • 3-year warranty.
  • 7 days a week customer service in the USA.
Cons
  • Some customers have found that the pedal is not very durable.
  • There have also been some complaints about the customer service.

Buy on Amazon

Check Price On Ebay

 

6

Features:

  •  3-in-1 welder/cutter/TIG torch
  • 50 amp plasma cutter
  • 200A stick welder
  • TIG torch for welding magnesium and stainless steel
  •   The welder is very versatile because it can weld, cut, and act as a TIG torch.
  •  The 50 amp plasma cutter can cut through tougher materials like cast iron and mild steel.
  •  The welder has a high power efficiency rating of 85%.
  •  The machine comes with a 200A stick welder for minor repairs.

The PrimeWeld 3-in-1 50 Amp Plasma Cutter is a versatile, multipurpose welding machine that cuts and welds in one. It’s equipped with a TIG torch for welding magnesium and stainless steel, as well as a 200A stick welder for minor repairs. The 50A plasma cutter is used for cast iron, mild steel, copper, and more. This welder/cutter also has an 85% power efficiency rating.

Pros
  • The machine is somewhat expensive.
  • It is a bit bulky and heavy, weighing in at over 100 pounds.
  • The welder requires a 220-volt power source.
  • The welder/cutter can be difficult to operate for beginners.
Cons
  • The machine is somewhat expensive.
  • It is a bit bulky and heavy, weighing in at over 100 pounds.

Buy on Amazon

Check Price On Ebay

 

7

Features:

  • 50-Amp plasma cutter
  • 200-amp TIG (stick) welder
  • 200-amp stick welder
  • Works with aluminum
  • Small, lightweight, and portable

The PrimeWeld Pilot Arc 50A Plasma Cutter/Welder Combo is the ultimate multipurpose welding machine. It features a 50-Amp plasma cutting function, 200-amp TIG (stick) welder, and 200-amp stick welder. This makes it perfect for a variety of projects around the home or Jobsite. It even works with aluminum! With its small size, lightweight, and portability, this unit is easy to use anywhere.

Pros
  • Multipurpose
  • 50-Amp plasma cutter
  • 200-amp TIG welder
  • 200-amp stick welder
Cons
  • No cons!

Buy on Amazon

Check Price On Ebay

 

8

Features:

  • 3-in-1 welding machine: TIG/MMA/Plasma Cutting
  • Upgraded foot pedal control function
  • Compact construction with concise LCD digital display
  • Easy to use and lightweight for easy maneuverability

520TSCPF is a 3-in-1 welding machine, which combines the functions of TIG/MMA and plasma cutting, perfect for home workshops or small businesses. It has an upgraded foot pedal control function, making it easier to operate. With a compact construction of a concise LCD digital display to easily control voltage and current for an effective operation; Combined with the easy-grip handle, making it light and easy to move.

Pros
  • The 3-in-1 functionality is great for those who want to do more than one type of welding
  • The foot pedal control makes it easy to operate
  • The compact construction and LCD digital display make it easy to use
  • The lightweight makes it easy to move around
Cons
  • Some users have found the machine difficult to set up
  • The machine may be too light for some users
  • The LCD digital display can be difficult to read in direct sunlight

Buy on Amazon

Check Price On Ebay

 

9

Features:

  • Upgraded model from CT418
  • Can be controlled by the foot pedal
  • Has a compact construction
  • Concise LCD digital display

The PULSE TIG Welder Plasma Cutter Stick Welder is an upgraded model from CT418. In addition to controlling the current through the panel knob, it can also be controlled by the foot pedal. It has a compact construction of a concise LCD digital display to easily control voltage and current for an effective operation. Combined with the easy-grip handle, making it is light and easy to move.

Pros
  • Easy to operate
  • Light and easy to move
  • Affordable
  • Durable
Cons
  • It may be too powerful for some projects
  • It May overheats if used for extended periods of time

Buy on Amazon

Check Price On Ebay

 

10

Features:

  • The latest technology: The TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter adopts the latest technology in the world and integrates plasma arc cutting into a single machine.
  • High power output: It has high power output and long service life.
  • Efficient and accurate: With this product, you can easily cut metal materials with efficiency and accuracy.
  • Multi-function: It is a multi-function tool that can be used to cut different kinds of metal materials, such as stainless steel, alloy steel, and copper.

The TOOLIOM 50A Non-Touch Pilot ARC Air Plasma Cutter is a multi-function tool that can be used to cut different kinds of metal materials, such as stainless steel, alloy steel, and copper. The product adopts the latest technology in the world and integrates plasma arc cutting into a single machine. It has high power output and long service life. With this product, you can easily cut metal materials with efficiency and accuracy. It is an indispensable tool for construction sites or small workshops for cutting metals efficiently without damaging the surrounding surface.

Buy on Amazon

Check Price On Ebay

 

Buying Guide For The Best Plasma Cutter Welders Combo

1. What material do you need to weld?

Welders are not limited to just steel; they can also weld aluminum, copper, and other metals. Make sure you know what type of metal you will be welding before buying a welder. Some welders are only designed for certain types of metals.

2. What is your budget?

Welders come in a range of prices, from less than $100 to over $2,000. Choose the welder that fits your budget.

3. How much power do you need?

Welders come in different power ratings. If you need to weld thick metal, you will need a welder with more power. If you are welding thin material, you can get away with a smaller power welder.

4. How much mobility do you need?

If you are doing welding work outside or in remote areas, then you will need to choose an AC/DC machine that runs off both vehicle battery and normal electrical outlets. Some units can be run on batteries alone; if this does not suit your needs, it may be worth looking at solar-powered options instead. Check the weight of the unit before buying so that you know how much impact it will have on mobility. Slimmer units are easier to carry around than bulkier ones.

5. Do I need additional features?

Not all welders come with additional features such as automatic voltage regulators, built-in fans, and adjustable amperage. Some of these features are necessary for certain welding jobs, but not for others. If you need a welder with additional features, make sure they are included in your price range.

3 Benefits Of Plasma Cutter Welders Combo

1. safety

When it comes to safety, a plasma cutter is a much safer option than oxy-fuel torches. The high-speed jet of hot plasma is difficult to control, which can lead to accidents. With a plasma cutter, the risks of fire, spark, and explosion are eliminated.

2. Speed

Speed is another important benefit of using a plasma cutter. The tool can cut through metal quickly and easily, which makes the process much faster than traditional methods.

3. Precision

Precision is the third benefit of using a plasma cutter. The high-speed jet of hot plasma results in a clean cut with very little distortion. This makes the tool ideal for precision work such as fabricating architectural metalwork or automotive body panels.

Conclusion

We hope you’ve enjoyed our list of the 10 best Plasma Cutter Welders Combo. If this is your first time shopping for one, we recommend starting with our top three picks before exploring other options. Have a favorite? Let us know in the comments below!

Leave a Comment