Music is best when it’s loud and clear, which is why many audiophiles are always looking for the best amp. It doesn’t matter if you’re a DJ or just want to listen to your favorite songs on a daily basis- you need an amp that will deliver high-quality sound at all times. But with so many different amps available, how do you find the best one? We’ve compiled 10 of the best models so that making this decision becomes easy!
Here Are The Top 3 Audiophile Amps To Check At A Glance If You Are In A Hurry:
Top 9 Best Audiophile Amps Reviewed
Monoblock 1000W RMS Amplifier with Bass Boost. A powerful, high-performance amplifier that delivers up to 1,000 watts of power into 4 ohms for maximum bass impact and performance. The Monoblock 1000W RMS features a variable 0dB – 12dB bass boost frequency control (30Hz – 80Hz), which allows you to dial in the perfect amount of low-end punch and kick for your music. This complete car audio amplifier is designed to deliver superior sound quality and will work perfectly with any type of subwoofer or speaker system.
The Audiopipe APMN-2000 is a 1-channel Class D monoblock subwoofer amplifier that delivers 2,000 watts of power at 2 ohms. The APMN-2000’s 1000 watts RMS x 1 channel will provide plenty of power for most systems, while the 2000 watt peak power rating allows you to take full advantage of your system’s potential.
The Audiopipe APMN-1500 is a 1500 Watt Class D Amplifier Built on a Mini Chassis to Provide Serious Power in a Tight Space. This Amp is a Mono Block 1 Channel Amplifier that is Stable at 1 Ohm and Comes with an Inline Fuse and Bass Knob. The Frequency Response of this amp is 30Hz – 180Hz and the Signal Noise Ratio of >70dB. Low Pass Filter of 40Hz-180Hz and Subsonic Filter of 0Hz-50Hz.
Upgrade your audio system to this high-performance class AB mini 4-channel amplifier boasting 1,300 watts of power for bumping bass and full sound. The APMI-4095 is made with four RCA inputs and one pair of speaker-level inputs. Connect the included remote gain control or wired remote bass level control to adjust your listening experience on the fly. Bridged operation for customizable use.
The NEW Audiopipe 1800w Mono Class D Amp is the perfect choice for your car stereo system. The amp boasts an impressive power output of 1800 watts and delivers a clean, crisp sound that will make your music come to life. It features an adjustable crossover control so you can fine-tune the frequency range of your speakers, giving you more control over how they sound. The amp also has a bass boost so you can get more bass out of your system. Whether it’s rock, jazz, or hip hop, this amp makes sure every note comes through loud and clear!
Audiopipe 1500W Class D Monoblock Amplifier is a high-quality amplifier that delivers an incredible 1500 watts of power, making it the perfect choice for powering your subwoofer or a pair of speakers. The amp features a variable low pass filter and a variable bass boost control to allow you to customize the sound to suit your specific needs.
Audiopipe’s APCLE-18001D 1800 Watt class D monoblock amplifier is the perfect choice for your next audio system upgrade. This high-performance amp delivers 1,800 watts of RMS power and variable Ohm for bumping bass and full sound. It features a custom subsonic filter and low-pass filter for hitting all frequencies, plus a phase adjustability switch to help you fine-tune your sound. Upgrade your audio system today with Audiopipe!
The AudioPipe APCLE-2002 Class AB 2 Channel 1000 Watt MAX Car Audio Power Amplifier is a must-have for your car audio system. It features a built-in variable high/low pass crossover, and remote volume control for subwoofers; 2 Ohm stereo stable and 4 Ohm monostable. With its minimized distortion and pulse width modulated MOSFET power supply, this amplifier is sure to give you amazing sound in your car.
The Audiopipe D1000.1 Class D Power Amplifier is a heavy-duty amplifier that will deliver 1000 watts of power at 2 ohms and 500 watts at 4 ohms. This amplifier has been designed to meet the demands of today’s high output subwoofers, with extreme efficiency and class-leading audio quality.
Buying Guide For The Best Audiophile Amps
1. Can the power supply handle the specifications?
Power supplies are a common source of noise. one can either use a regulated PS or expect to spend a lot on PS upgrade down the road. Different amps have different requirements, so be aware of what sort of power supply your amp might require before buying it.
2. What type of amplification scheme is used?
Triode tube amps, for example, need output transformers as they generate impedance distortion at low frequencies. This limits their usability in some setups and many people would prefer to avoid them entirely. On the other hand, pentodes generate far less IMD and work well with both single-ended and push-pull designs that don’t need an output transformer (OT). Some SET amps come with feedback to compensate for their inherently limited speed and avoid IMD distortion altogether.
3. What is the output impedance?
This is often overlooked by beginners, but it can be of great importance in some setups. The amplifier’s connection to the load determines the damping factor that affects bass response and stability with reactive speakers (typically tweeters). If you have a 4Ω speaker and use an 8Ω amp, consider what damping factor you will get: if it’s more than 3 your bass might feel slow and flat; less than 10 and your amps might become unstable with such speakers, due to phase shift around resonance frequency of voice coils. There are many interactive calculators online to compute this number for impedances – this one is particularly good.
4. What is the amplifier’s gain?
This number tells you how much your pre-amp will amplify the signal. If it has insufficient gain, strong noise present in quiet passages might be enough to push the amp into clipping and cause gross distortion; too much and low-level signals such as those from vinyl records will not get loud enough. The best solution here is a variable gain useable with a remote control so one can adjust it easily, although some amps have separate gain settings for different inputs which help somewhat. Cheap receivers often have inadequate or no internal amplification at all so this should also be considered when shopping for them online. And finally, if the amp has fixed/shared input impedance it must be compatible with other components in the signal chain.
5. How much does it cost?
This is a fairly obvious point but that doesn’t mean one should go for the cheapest option all the time. Inexpensive designs might not have enough power to drive difficult loads, sacrificing sound quality at higher listening levels. They’re also often poorly designed and unreliable, which isn’t something most people want from a machine they listen to their music through, especially when they can get more expensive alternatives with better performance and reliability instead. So unless you need everything in your setup to be cheap, A/B test different amps before making up your mind if going cheaper will satisfy you in the long run or not – good headphones won’t hurt either!
3 Benefits Of Audiophile Amps
1. Better Signal Quality
One major benefit of using an amplifier is that it can greatly improve the quality of signals being pushed into them. If you have ever listened to music through anything less than a high-quality sound card, you appreciate just how much better things can be when an audiophile amp is powering your speakers. Audiophile amps have amplification circuits capable of sound details which would otherwise be lost.
2. Better Electrical Current
One common misconception is that an amplifier’s current draw is related to how loud a speaker can go before it breaks. This isn’t the case at all, though, and the benefits of using audiophile amps have little to do with their electrical current capacity. Audiophiles will choose amps that utilize switching power supplies over those with linear power supplies because they supply a much cleaner signal to your speakers.
3. Efficient Power Usage
When high-end audio equipment was first being introduced in the 1970s, much of what we now know as “audiophile” wasn’t known yet. Manufacturers like Bang and Olufsen were introducing a new type of sound reproduction technology called “matrix” surround sound, and these types of systems were generally considered the pinnacle of quality. In order to get speakers which could play loudly enough to meet people’s expectations, manufacturers needed an amplifier that could be extremely efficient with power usage.
Conclusion
Every audiophile amp on this list is a great model that fits into one of our 10 categories. If you feel overwhelmed by the choices, consider narrowing your search to find the perfect match for your needs. Now go forth and find an amplifier that will make your stereo system sound even better! Which Audiophile Amps do you like?