In this article, we will be discussing the best types of 8-inch jointers and what to look for in a jointer. There are many different options available and finding the best one can be overwhelming at times. The good news is we’re here to help! We’ll go over some of the best features that you should look out for when searching for the best 8-inch jointer on the market.
If You Are In A Hurry, Here Are The Suggested 8 Inch Jointer For You:
Top 8 Best 8 Inch Jointer Reviewed
Buying Guide For The Best 8 Inch Jointer
1. What will you be using it for?
It may seem obvious, but this should really be your first question when considering getting an 8-inch jointer if you’ve never owned one before. Will you just be milling lumber? Do you mainly see yourself edge jointing boards? Is cross-cutting the main task you will be performing? How about chamfering edges or cutting decorative moldings?
2. What is your budget for this project?
A jointer can cost anywhere from $550 to $3000 depending on its size, capabilities, and motor. If money is a little issue then it’s always best to get the machine that has all of the features you feel like you could use. However, if you are like most people and have a limited amount of money, think carefully about what would benefit your woodworking the most. For example, I wouldn’t say no to an extra-long infeed table. But I know that I rarely ever need more than 6 inches worth of support milling lumber so having one isn’t vital to my work.
3. What is your available space?
This question should almost always be considered before making any woodworking purchase. I’m sure this has happened to many of you, but you go online and see that beautiful $2000 cabinet saw that will turn the world of your woodshop into a utopia…only to find out that its overall dimensions are 48″ deep x 32″ high x 60″ long (or whatever). Your carpenter’s bench with an attached toolbox can only fit through so many doors, having room for the lumber to pass through isn’t an option anymore because there isn’t enough space! To measure where you think you would like your jointer placed (most importantly both ways) if it would fit then go for it! If not, consider other options.
4. Do you need a spiral cutter head or a traditional knife cutter?
There are two different types of 8-inch jointers. The first has the same type of blades as your table saw, sleds, and miter gauge will work just fine on this machine. The second one has roughly ⅛” wide by 2″ long knives that are very fragile to changes in wood moisture levels (“tears out”, “crooked cuts”, etc.). Many people prefer this type of jointer because they claim there is much less tear out (I’m personally torn because I can’t really see the difference).
5. What size lumber will you mill most often?
8-inch jointers will tackle any piece of lumber that is 8″ wide or less. But if you think you will be running a lot of really large boards through your jointer then it may be wise to consider a larger machine.
3 Benefits Of 8 Inch Jointer
1. Builds Straight, Square and Flat Work
8-inch jointers utilize a very heavy (usually) cast iron base which creates a stable surface as the wood passes through the machine. Other machines such as portable planers and thickness sanders do not always create flat surfaces on both sides of the material, and more often than not they only come with one straight edge that serves as a fence to guide the workpiece (wood) through it and keep it on track. A jointer has two straight edges that line up perfectly with each other when the machine is adjusted properly, resulting in flat surfaces on both sides of whatever you’re surfacing.
2. Removes Saw Marks and Knife Lines
Another excellent feature of 8-inch jointers is the length of the tables (the horizontal surfaces that you’re planing or surfacing against while using them). These machines typically have tables that span anywhere from 18 inches to 30 inches in width! This is a tremendous amount of surface area for applying hand pressure on whatever workpiece you may be trying to remove any saw marks, knife lines, etc. from. Especially when working with hardwoods such as maple, mahogany, walnut, cherry, oak, etc., these jointers will make quick work of whatever wood your material may be made up of.
3. Accommodates Wide Boards Easily
Most 8 inch jointers are fitted with cast iron extensions that attach to either side of the machine which creates a larger working surface (and thus, more room for error in wood alignment when planing/surfacing). These extensions typically extend 9 – 12 inches in an outward direction. The purpose behind this extra width is to accommodate wider boards than what you can normally fit through most other machines.
The Last Line
We hope this article has helped you narrow down the types of 8-inch jointers to use. If you liked our post, please share it with your friends and family! Which 8 Inch Jointer do you like most?